Lap Joint Stub Ends

Trang chủ > Butt weld fittings > Lap Joint Stub Ends

Lap Joint Stub Ends

Tình trạng hàng : Stock kho Tại Việt Nam
Nguồn gốc xuất xứ : China / Japan / Korea / Sigapore, G7, Thailand
Bảo hành : 12 Tháng
Địa điểm giao hàng : Tại kho bên mua
Thanh toán : TTA/LC
Ứng dụng sản phẩm : Xăng dầu, Khí gas, PCCC, Cấp thoát nước,
Lượt xem : 370

CATALOG PROFILE

Thông số kỹ thuật
Tên gọi khác

Công ty cổ phần đầu tư quốc tế TAP Việt Nam (TAPPGROUP), là nhà nhập khẩu , sản xuất phân và phối sản phẩm Lap Joint Stub Ends (Lap Joint Stub Ends ASTM A234) có úy tín trên thị trường, các sản phẩm Lap Joint Stub Ends của công ty TAP Việt Nam cung cấp ra thị trường được kiểm tra nghiêm ngặt về chất lượng trước khi được xuất kho bàn giao đến khách hàng sử dụng, và được các nhà thầu công trình cùng các chủ đầu tư tin tưởng sử dụng.

Với số lượng tồn kho lớn chúng luôn cung ứng cho khách hàng với thời gian nhanh nhất và giá cả hợp lý và ổn định

Sản phẩm được bảo hành 12 tháng.

Thông tin liên lạc.

CÔNG TY CỔ PHẦN ĐẦU TƯ QUỐC TẾ VIỆT NAM

Địa chỉ : Số 32, Lô N4D, khu tái định cư X2A, Yên sở, Hoàng Mai, Hà Nội.

Điện thoại: 024 666 191 71, -, 0933 86 77 86, -, 0983, 673, 798

Email: info@tapgroup.vn

Website: http://tapgroup.vn - http://tapgroup.com.vn/.

Chi tiết Lap Joint Stub Ends thép ASTM A234 WPB
Long radius Lap Joint Stub Ends	Short radius Lap Joint Stub Ends	Lap Joint Stub Ends ASTM A234 WPB	Lap Joint Stub Ends A234 ZincCoating
Lap Joint Stub Ends ASTM A234 WPB, Hot dipped galvanized		Lap Joint Stub Ends A234 WPB	Lap Joint Stub Ends mạ kẽm
Lap Joint Stub Ends ASTM A234 WPB, galvanized		Lap Joint Stub Ends A234 WPB, Zinc plating
Lap Joint Stub Ends ASTM A234 WPB anti-rust oil		Lap Joint Stub Ends A234 WPB, black paint
Lap Joint Stub Ends thép đen		Lap Joint Stub Ends thép mạ kẽm
Lap Joint Stub Ends ASTM A234 WPB Seamless		Lap Joint Stub Ends ASTM A234 WPB SMLS
Lap Joint Stub Ends SA 234 WPB		Lap Joint Stub Ends SA 234 SMLS
Lớp phủ (Coating) Lap Joint Stub Ends ASTM A234 WPB
Hot dip galvanized	Mạ kẽm nhúng nóng	Galvanized	ECTFE Coatings
PTFE Coating	PFA Coating	FEP Coating	ECTFE Lining
PTFE Lining	PTFE Polytetrafluoroethylene (PTFE)	PFA Lining	FEP Lining
PVDF Lining	PTFE MS Lined Pipes and Fittings	Black Coated	FBE Fusion Bonded Epoxy
FBE External Tape	FBE Internal Coating	2 Layer FBE + Rough Coating	Double Layer FBE
Dual Coat FBE Capabilities	Fusion Bonded Epoxy (FBE) Coating	Ceramic Epoxy Lining	Superior External Coating For Fittings
Fusion Bond Epoxy Coatings	3PE Epoxy coating	Fusion Bond Epoxy (FBE)	Ceramic Epoxy
PROTECTIVE FUSION BONDED EPOXY (FBE)	CERAMIC EPOXY LINED	3LPE THREE-LAYER POLYETHYLENE	3LPP THREE-LAYER POLYPROPYLENE
Ceramic-Lined Pipe and Fittings	Epoxy powder coating	polyethylene-lined	polyethylene lining
Small-Diameter Single-Layer Bonded Polyethylene-Coated		PLP-P1H (Single-Layer Bonded Polyethylene-Coated)
PLP-P2S (Polyethylene-Coated)		JDLP (PVC-Lined Steel)	Plastic-Lined
PFA Lining	Epoxy coating	Coating FBE epoxy powder coating	Epoxy PE Coating
with epoxy liquid coating meeting	Fusion Bond Epoxy Coated	Epoxy color coated	Polyethylene Coated
Hot-dipped Galvanized or Epoxy Coating		Plastic PE Coated
Áp xuất Schedule Lap Joint Stub Ends thép ASTM A234 WPB
SCH5	SCH10	SCH20	SCH30
SCH STD	SCH40	SCHXS
SCH80	SCH100	SCHXS	SCH120
SCH120	SCH160	SCH XXS
Tiêu chuẩn Lap Joint Stub Ends thép ASTM A234 WPB
ASME B16.9, Factory-Made Wrought Butt weld fittings	ANSI B16.9, Factory-Made Wrought Butt weld fittings	ASME B16.25 Buttwelding End	ANSI B16.25 Buttwelding End
ASME B16.28, Wrought Steel Buttwelding Short radius Elbow and Returnsʹ		MSS SP-43, Wrought and Fabricated Butt - weld fittings For Low Pressure, Corrosion
API 590		API 605
DIN2605	DIN2615	DIN2616	DIN2617
DIN28011	EN10253-1	EN10253-2	EN 10253-3 EN 10253-4
DIN 2605-1	DIN 2609	DIN 2605-2	DIN 2616-2
DIN 2616-1	DIN 2615-1	DIN 2615-2	DIN 2616-2
DIN 28011	DIN 2617	EN 10204 3.1	EN 10253-2
KS B 1522 Steel Butt Welding Pipe Fittings for Oidinary use and Fuel Gas	KS B 1541 Steel Butt Welding Pipe Fittings	KS B 1543 Steel Plate Butt Welding Pipe Fittings	JIS B 2311 Steel Butt Welding Pipe Fittings for Ordinary use
JIS B 2312 Steel Butt Welding Pipe Fittings	JIS B 2313 Steel Plate Butt Welding Pipe Fittings	ASME B31.1 Power piping	ASME B31.3 Process piping.
ASME SECTION II, Materials	ASME SECTION, III	ASME SECTION, V	ASME SECTION, VIII
DIN 2605 - 2606 - 2615 - 2616 - 2617 - BS 1640 - GOST 17374 - 17375 - 17376 - 17377		17378 - 17379 - 17380	MSS SP-43
ASME B31.1 - ASME B31.3 - ASME B31.4 - ASME B31.8		EN 13445 - 13480 - 12952 (Former BS PD 5500 - Swedish Ordinance AFS 1994:39)
Vật liệu Lap Joint Stub Ends
Class	Construction	Non-destructive Examination
SMLS	Seamless	None
W	Welded	Radiography or Ultrasonic
WX	Welded	Radiography
WU	Welded	Welded Ultrasonic
ASTM A234 Gr. WPA	ASTM A234 Gr. WP1	ASTM A234 Gr. WP22	ASTM A420 Gr. WPL3
ASTM A234 Gr. WPC	ASTM A234 Gr. WP5	ASTM A234 Gr. WP23	ASTM A420 Gr. WPL6
ASTM A234 Gr. WPB	ASTM A234 Gr. WP9	ASTM A234 Gr. WP91	ASTM A420 Gr. WPL9
ASTM A234 Gr.WP12	ASTM A234 Gr. WP11	ASTM A234 Gr. WP92	ASTM A234 Gr. WPR
ASTM A234 Gr. WP11, CL1	ASTM A234 Gr.WP12, CL1	ASTM A234 Gr. WP22, CL1	ASTM A234 Gr. WP5, CL1
ASTM A234 Gr. WP11, CL2	ASTM A234 Gr.WP12, CL2	ASTM A234 Gr. WP22, CL3	ASTM A234 Gr. WP5, CL3
ASTM A234 Gr. WP11, CL3	ASTM A234 Gr.WP12, CL3	ASTM A234 Gr. WP9, CL1	ASTM A234 Gr. WP9, CL3
ASTM A403 Gr.WP304	ASTM A403 Gr.WP304L	ASTM A403 Gr.WP316	ASTM A403 Gr.WP316L
ASTM A403 Gr.WP304H	ASTM A403 Gr.WP304N	ASTM A403 Gr.WP304LN	ASTM A403 Gr.WPN
ASTM A403 Gr.WP316H	ASTM A403 Gr.WP316N	ASTM A403 Gr.WP316LN	ASTM A403 Gr. WP317
ASTM A403 Gr. WP317L	ASTM A403 Gr. XM-19	ASTM A403 Gr. WP309	ASTM A403 Gr. WP310S
ASTM A403 Gr.S31254	ASTM A403 Gr. WP31725	ASTM A403 Gr. WP31726	ASTM A403 Gr. WP31727
ASTM A403 Gr. WP32053	ASTM A403 Gr. WP321	ASTM A403 Gr. WP321H	ASTM A403 Gr.WPS33228
ASTM A403 Gr.WPS34565	ASTM A403 Gr.WP347	ASTM A403 Gr.WP347H	ASTM A403 Gr.WP348
ASTM A403 Gr.WP348H	ASTM A403 Gr.WPS38815	SA815 UNS 32760
UNS / Desiganation Lap Joint Stub Ends
UNS S20910	UNS S31008	UNS S31700	UNS S32109
UNS S30400	UNS S31254	UNS S31703	UNS S33228
UNS S30403	UNS S31600	UNS S31725	UNS S34565
UNS S30409	UNS S31603	UNS S31726	UNS S34700
UNS S30451	UNS S31609	UNS S31727	UNS S34709
UNS S30453	UNS S31651	UNS S32053	UNS S34800
UNS S30900	UNS S31653	UNS S32100	UNS S34809
UNS S38815	ASTM A815 Grade S32550	ASTM A815 Grade. WPS31803	SA815 UNS32205
ASTM A860 Gr. WPHY 42	ASTM A860 Gr.46	ASTM A860 Gr. 52	ASTM A860 Gr.70
ASTM A860 Gr. WPHY 80	ASTM B366 Grade WP20CB	ASTM B366 Grade WPN	ASTM B366 Grade WPNL
ASTM B366 Grade WPNC	ASTM B366 Grade WPNCI	ASTM B366 Grade WPNCMC	ASTM B366 Grade WPNIC
ASTM B366 Grade WPNIC10	ASTM B366 Grade WPNIC11	ASTM B366 Grade WPNICMC	SA815 UNS 32750
Alloy 20	UNS. N08020	Nickel 200	UNS. N02200
Nickel 201	UNS. N02201	Monel 400	UNS. N04400
Inconel 600	UNS. N06600	Inconel 625	UNS. N06625
Incoloy 800	UNS. N08800	Incoloy 800H	UNS. N08810
Incoloy 800HT	UNS. N08811	Incoloy 825	UNS. N08825
ASTM B363 Grade WPT2	ASTM B363 Grade WPT12

Stockholder Of ASME / ANSI - B 16.9 Seamless Butt weld Lap Joint Stub End in India | ANSI B16.28 Seamless Butt weld Lap Joint Stub End Stockist In India | ASME B16.25 Seamless Lap Joint Stub End| Suppliers of best quality Lap Joint Stub End | Distributers Of wide variety of Lap Joint Stub End in India | ASTM A182 Lap Joint Stub End | Lap Joint Stub End india, Lap Joint Stub End | ASTM B366 Lap Joint Stub Enddistributor in Mumbai, Lap Joint Stub End | Lap Joint Stub Endtraders in India | Specialize in manufacturing of Lap Joint Stub End| Lap Joint Stub Endwith Test Certificate | Lap Joint Stub Endat dealer price | Stainless Lap Joint Stub End| MSS SP-43 Seamless Lap Joint Stub End | Importers Of Austenitic stainless steels Seamless Lap Joint Stub End in India | Lap Joint Stub End Manufacturers In Mumbai, Maharashtra.

Type		Butt weld (BW)
Standards		ASME / ANSI - B 16.9 ASTM A403 - ASME SA403 - 'Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings' API 590-605 ASME B16.9 - 'Factory-Made Wrought Buttwelding Fittings' ASME B16.25 - 'Buttwelding Ends' ASME B16.28 - 'Wrought Steel Buttwelding Short Radius Elbows and Returns' MSS SP-43 - 'Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications'
Dimension		ANSI B16.9, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2312, JIS B2313
Thickness		Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
Schedule		Sch 5 TO Sch XXS.
Size		1/2” TO 36”, (Seamless up to 24”), (Welded 8” TO 36”)

Materials and Grade:

Stainless Steel :

ASTM A403 WP316/316L
ASTM A403 WP304/304L
ASTM A182 F316L, 304L
DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404

Carbon Steel :

ASTM A234 Gr. WPB
ASTM A420 Gr. WPL6
ASTM A105
ASTM A350 Gr. LF2

Nickel Alloy :

Monel 400 & 500,
Inconel 600 & 625,
Incolloy 800, 825,
Hastelloy C22, C276,
Hastelloy,
Nickel,
Monel,
Inconel,
Alloy20,
Copper Nickel
Cupro-Nickel 90/10
Cupro-Nickel 70/30

Alloy steel :

ASTM a234 wp1 / wp5 / wp9 / wp11 / wp22 / wp91

Lap Joint Stub End S DIMENSION

Nominal Pipe Size	Outside diameter of barrel		Length (F)		Radius (R)	Diameter (G)
Nominal Pipe Size	Minimum	Maximum	Long Pattern	Short Pattern	Radius (R)	Diameter (G)
1/2"	20.5	22.8	76	51	3	35
3/4"	25.9	28.1	76	51	3	43
1"	32.6	35.0	102	51	3	51
1 1/4"	41.4	43.6	102	51	5	64
1 1/2"	47.5	49.9	102	51	6	74
2"	59.5	62.4	152	64	8	92
2 1/2"	72.2	75.3	152	64	8	105
3"	88.1	91.3	152	64	10	127
3 1/2"	100.8	104.0	152	76	10	140
4"	113.5	116.7	152	76	11	157
5"	140.5	144.3	203	76	11	186
6"	167.5	171.3	203	89	13	216
8"	218.3	222.1	203	102	13	270
10"	272.3	277.2	254	127	13	324
12"	323.1	328.0	254	152	13	381
14"	354.8	359.9	305	152	13	413
16"	405.6	411.0	305	152	13	470
18"	456.0	462.0	305	152	13	533
20"	507.0	514.0	305	152	13	584
22"	558.0	565.0	305	152	13	641
24"	609.0	616.0	305	152	13	692

Lap Joint Stub Ends - Ansi 16.9 tolerances

DIMENSIONAL TOLERANCES - LAP JOINT STUB ENDS
For all fittings				Stub Ends
Nominal Pipe Size (NPS)	Outside Ø at Bevel	Indide Ø at End	Wall Thickness t / t1	O.D. of Lap G	Fillet Radius of Lap - R	Overall Length. - F
1/2 a 2 1/2	1	0,8	Not	+0 -1	+0 -1	2
3 a 3 1/2	1	1,6	less	+0 -1	+0 -1	2
4	+2 -1	1,6	than	+0 -1	+0 -2	2
5 a 6	+3 -1	1,6	87,50%	+0 -1	+0 -2	2
8	2	1,6	of nominal	+0 -1	+0 -2	2
10	+4 -3	3,2	tickness	+0 -2	+0 -2	2
12 to 18	+4 -3	3,2		+0 -2	+0 -2	3
20 a 24	+6 -5	4,8		+0 -2	+0 -2	3
26 a 30	+7 -5	4,8
32 a 48	+7 -5	4,8

Lap Joint Stub End Producer, Lap Joint Stub End Manufacturers, Lap Joint Stub End Production, Lap Joint Stub End inventory, Lap Joint Stub End Dealers, Lap Joint Stub End Suppliers, Lap Joint Stub End Price, Lap Joint Stub End Factory, Lap Joint Stub End Godown, Lap Joint Stub End Stockyard, Lap Joint Stub End Exporters, Lap Joint Stub End Brand, Lap Joint Stub End Stockist, Lap Joint Stub End Distributors India, Mumbai, Bengaluru, Chennai, Pune, Kolkata, Gurgaon, Navi Mumbai, Ahmedabad, Vadodara, Rajkot

Lap Joint Stub End Production Range

Outside Diameter: Seamless Pipe Bends (1/2″ – 24″), ERW / Welded / Fabricated Pipe Bends (2″ – 36″)

Wall Thickness: 3mm-40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS

Elbow: R=1D Elbow , 2D Elbow, 3D Elbow, 5D Elbow, 6D Elbow, 8D Elbow, 10D Elbow or Custom
Bending Radius: R=1D Bend , 2D Bend, 3D Bend, 5D Bend, 6D Bend, 8D Bend, 10D Bend or Custom

Product Angle: 0° – 180°

Lap Joint Stub EndProduction Grades: Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel, Carbon Steel, Cupro Nickel

Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering

Lap Joint Stub End Manufacturing Standards

ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN: EN10253-1, EN10253-2

ASTM A403 – ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASME B16.9 – Factory-Made Wrought Fittings Buttwelding
ASME B16.25 – Buttwelding Ends ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding Returns
MSS SP-43 – Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

Lap Joint Stub End Material Grades

Stainless Steel 180° Short Radius Elbow; ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
Carbon Steel 180° Short Radius Elbow: ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
Low Temperature Carbon Steel 180° Short Radius Elbow: ASTM A420 WPL3, A420 WPL6
Alloy Steel 180° Short Radius Elbow: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
Duplex Steel 180° Short Radius Elbow: ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Werkstoff No. 1.4462
Nickel Alloy 180° Short Radius Elbow: ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

Ganpat Metal Industries is one of the most recognised manufacturers, suppliers and exporters in India of Lap Joint Stub End S. We are manufacturing Stainless Lap Joint Stub End S, Alloy Lap Joint Stub End S and Carbon Lap Joint Stub End S at best cost in India. We are Distributer, Traders, Stockist as well as Stockholder of Lap Joint Stub End S in Mumbai, Maharashtra.

Best Offers On Below Products :
A234 AISI 4130 High Strength Low Alloyed Lap Joint Stub End 201 Stainless Lap Joint Stub End 202 Stainless Lap Joint Stub End 304 Stainless Lap Joint Stub End 304L Stainless Lap Joint Stub End DIN 1.4961 Lap Joint Stub End DIN 1.4840 Lap Joint Stub End DIN 1.4845 Lap Joint Stub End DIN 1.4449 Lap Joint Stub End DIN 1.4438 Lap Joint Stub End DIN 1.4841 Lap Joint Stub End 316TI Stainless Lap Joint Stub End 316H Stainless Lap Joint Stub End 316L Stainless Lap Joint Stub End 316LN Stainless Lap Joint Stub End 317 Stainless Lap Joint Stub End 317L Stainless Lap Joint Stub End 321 Stainless Lap Joint Stub End ASME B16.9 Lap Joint Stub End ASME B16.25 Lap Joint Stub End MSS SP-75 Lap Joint Stub End SCH10 Lap Joint Stub End SCH20 Lap Joint Stub End SCH30 Lap Joint Stub End STD SCH40 Lap Joint Stub End DIN 1.4305 Lap Joint Stub End DIN 1.4301 Lap Joint Stub End DIN 1.4307 Lap Joint Stub End DIN 1.4948 Lap Joint Stub End DIN 1.4401 Lap Joint Stub End DIN 1.4404 Lap Joint Stub End DIN 1.4919 Lap Joint Stub End DIN 1.4571 Lap Joint Stub End DIN 1.4541 Lap Joint Stub End DIN 1.4878 Lap Joint Stub End UNS S32900 Lap Joint Stub End UNS S34700 Lap Joint Stub End UNS S34709 Lap Joint Stub End UNS S31000 Lap Joint Stub End UNS S31008 Lap Joint Stub End Duplex Lap Joint Stub End UNS S31700 Lap Joint Stub End UNS S31703 Lap Joint Stub End UNS S31400 Lap Joint Stub End SCH60 Lap Joint Stub End SCH XS Lap Joint Stub End SCH80. Lap Joint Stub End DIN 2605 Lap Joint Stub End DIN 2609 Lap Joint Stub End DIN 2617 Lap Joint Stub End EN 10253-3 Lap Joint Stub End	347H Stainless Lap Joint Stub End 904L Stainless Lap Joint Stub End 321H Stainless Lap Joint Stub End 347 Stainless Lap Joint Stub End ASTM A403 Lap Joint Stub End A403 Gr WP304 Lap Joint Stub End A403 Gr WP 304L Lap Joint Stub End UNS N08904 Lap Joint Stub End UNS S17400 Lap Joint Stub End A403 Gr WP316Ti Lap Joint Stub End UNS S32109 Lap Joint Stub End A403 Gr WP321 Lap Joint Stub End A403 Gr WP321H Lap Joint Stub End A403 Gr WP347 Lap Joint Stub End A403 Gr WP347H Lap Joint Stub End A403 Gr WP317 Lap Joint Stub End A403 Gr WP 317L Lap Joint Stub End Stainless Steel Buttweld Lap Joint Stub End ASTM A234 WPB Lap Joint Stub End A234WPC Lap Joint Stub End A420 WPL6 Lap Joint Stub End ASTM A694 Lap Joint Stub End UNS S30300 Lap Joint Stub End UNS S30400 Lap Joint Stub End UNS S30403 Lap Joint Stub End UNS S30409 Lap Joint Stub End UNS S31600 Lap Joint Stub End UNS S31603 Lap Joint Stub End UNS S31609 Lap Joint Stub End DIN 1.4460 Lap Joint Stub End DIN 1.4550 Lap Joint Stub End DIN 1.4006 Lap Joint Stub End DIN 1.4005 Lap Joint Stub End Duplex Stainless Lap Joint Stub End DIN 1.4021 Lap Joint Stub End DIN 1.4016 Lap Joint Stub End UNS S31635 Lap Joint Stub End UNS S32100 Lap Joint Stub End 304H Stainless Lap Joint Stub End 309S Stainless Lap Joint Stub End 310S Stainless Lap Joint Stub End 310H Stainless Lap Joint Stub End 316 Stainless Lap Joint Stub End UNS S13800 Lap Joint Stub End UNS S66286 Lap Joint Stub End UNS S66286 Lap Joint Stub End UNS S20910 Lap Joint Stub End UNS S21800 Lap Joint Stub End SCH160 Lap Joint Stub End DIN 2615 Lap Joint Stub End DIN 2616 Lap Joint Stub End	ASTM A860 WPHY 52 Lap Joint Stub End ASTM A860 WPHY 56 Lap Joint Stub End ASTM A860 WPHY 60 Lap Joint Stub End UNS S43020 Lap Joint Stub End UNS S43100 Lap Joint Stub End UNS S44004 Lap Joint Stub End ASTM A860 WPHY 65 Lap Joint Stub End ASTM A860 WPHY 70 Lap Joint Stub End ASTM A234 Lap Joint Stub End ASTM A234 Alloy Lap Joint Stub End Alloy Steel Buttweld Lap Joint Stub End Stainless Lap Joint Stub End Carbon Lap Joint Stub End Alloy Lap Joint Stub End ASTM A420 WPL6 Lap Joint Stub End UNS S41000 Lap Joint Stub End UNS S41600 Lap Joint Stub End UNS S42000 Lap Joint Stub End A403 Gr WP316 Lap Joint Stub End A403 Gr WP316L Lap Joint Stub End UNS S43000 Lap Joint Stub End UNS S44600 Lap Joint Stub End UNS S44200 Lap Joint Stub End UNS S15500 Lap Joint Stub End Carbon Steel Buttweld Lap Joint Stub End ASTM A860 WPHY 42 Lap Joint Stub End ASTM A420 WPL3 Lap Joint Stub End ASTM A234 WP12 Lap Joint Stub End ASTM A234 WP11 Lap Joint Stub End ASTM A234 WP22 Lap Joint Stub End ASTM A234 WP5 Lap Joint Stub End DIN 1.4104 Lap Joint Stub End DIN 1.4057 Lap Joint Stub End DIN 1.4125 Lap Joint Stub End DIN 1.4762 Lap Joint Stub End DIN 1.4742 Lap Joint Stub End 309H Stainless Lap Joint Stub End DIN 1.4539 Lap Joint Stub End DIN 1.4542 Lap Joint Stub End DIN 1.4545 Lap Joint Stub End Super Duplex Lap Joint Stub End DIN 1.4534 Lap Joint Stub End DIN 1.4980 Lap Joint Stub End ASTM A234 WP9 Lap Joint Stub End ASTM A234 WP91 Lap Joint Stub End SCH100 Lap Joint Stub End SCH120 Lap Joint Stub End SCH140 Lap Joint Stub End EN 10253-1 Lap Joint Stub End EN 10253-2 Lap Joint Stub End SCH XXS Lap Joint Stub End